LM393ADGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393ADGKRG4 Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as Differential .There are a total of 2 elements in it.The board includes 8 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator has 8 pins.You may wish to search LM393 for more solutions that address your specific needs.The comparator presents a quiescent current of 2.5mA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 500μA .A current supply greater than 500μA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.According to the voltage formula, the part has a voltage gain of 106.02dB .The device is packaged in TR and is often used in ADC circuits.
LM393ADGKRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393ADGKRG4 Applications
There are a lot of Texas Instruments LM393ADGKRG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Infotainment & cluster
- Power management
- Laptop Computers
- Battery-Powered Electronics
- Factory automation & control
- Point of load regulators
- Multivibrators and High-Voltage Digital Logic Gates
- Notebooks and PDAs
- Threshold Detectors
