LM48511SQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM48511 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 14.5mA |
| Quiescent Current | 13.5mA |
| Output Power | 3W |
| Common Mode Rejection Ratio | 73 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 88dB |
| Gain | 52 dB |
| Max Output Power | 6.7W |
| Dual Supply Voltage | 5V |
| Max Output Power x Channels @ Load | 6.7W x 1 @ 4 Ω |
| Ambient Temperature Range High | 85°C |
| Load Impedance | 8Ohm |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM48511SQ/NOPB Overview
The device is embedded in 24-WFQFN Exposed Pad .The device is in the form of Tape & Reel (TR) .There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The output it is configured with uses 1-Channel (Mono) .This electrical device has the type Class D .Computers and other communication devices feature 24 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .There is 3V~5.5V supply voltage for this electrical device.Currently, the device has only 1 channels.The operation of Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Temperatures should not exceed -40°C~85°C TA .Amp parts is part of Audio/Video Amplifiers .Amp parts is a member of the LM48511 family.Amp parts is recommended to mount the chip in the way of Surface Mount .According to the manufacturer, the maximum output power of this electronic component is 6.7W kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 3V so that the device functions normally.Amp parts is a Single supply type.This is a member of the Boomer? series.The device consumes 13.5mA quiescent current and is unaffected by external influences.
LM48511SQ/NOPB Features
24-WFQFN Exposed Pad package
LM48511 family
6.7W kWh per hour
Boomer? series
LM48511SQ/NOPB Applications
There are a lot of Texas Instruments LM48511SQ/NOPB audio amplifiers applications.
- Automation control systems
- Communication
- Fast A/D and D/A converters, video amplifiers
- Weak signal detection
- Information processing
- High gain DC amplifier
- pH (acidity)
- Proportional operation circuits
- Computer workstations and wireless base stations
- Band-pass filter
