LM4865MM/NOPB
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM4865 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) with Mono Headphones |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 4mA |
| Quiescent Current | 3.5mA |
| Output Power | 750mW |
| Supply Type | Single |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Max Output Power | 1W |
| Max Output Power x Channels @ Load | 1W x 1 @ 8 Ω; 110mW x 1 @ 32 Ω |
| Harmonic Distortion | 1% |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Mute, Shutdown, Thermal Protection, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
LM4865MM/NOPB Overview
There is a device embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Amp parts is recommended that the chip be packaged in a Cut Tape (CT) case.8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts is configured to produce 1-Channel (Mono) with Mono Headphones as Amp partss output.An electrical device of type Class AB is involved.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The electronic component is mounted in the way of Surface Mount .This electrical device operates at 2.7V~5.5V volts.There are no channels on the device.When operating, it is possible to ensure Depop, Mute, Shutdown, Thermal Protection, Volume Control .No temperature higher than -40°C~85°C TA should be used for operations.The device contains 8 pins.This part is included in Audio/Video Amplifiers .Amp parts is included in the LM4865 family.There is an electronic part in the way of Surface Mount .There is a maximum output power of 1W kWh per hour from this electronic component.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.7V .Supply type Single is assigned to this electronic part.The electronic part belongs to the Boomer? series.The device consumes 3.5mA quiescent current and is unaffected by external influences.
LM4865MM/NOPB Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
LM4865 family
1W kWh per hour
Boomer? series
LM4865MM/NOPB Applications
There are a lot of Texas Instruments LM4865MM/NOPB audio amplifiers applications.
- Communication
- High gain DC amplifier
- Biopotential
- High/low-pass filter circuit
- Medical imaging
- Portable electronic products powered by batteries
- Signal amplification
- Band-pass filter
- Integrator and differentiator circuits
- Vehicle electronics
