LM4911MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Mute, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM4911 |
| Pin Count | 10 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Nominal Supply Current | 2mA |
| Output Power | 145mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Gain | 30 dB |
| Max Output Power | 145mW |
| Max Output Power x Channels @ Load | 145mW x 2 @ 16 Ω |
| Harmonic Distortion | 1% |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4911MM/NOPB Overview
There is a device embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .In addition, there are 10 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured to produce Headphones, 2-Channel (Stereo) as Amp partss output.This electrical device has the type Class AB .Computers or other communication devices have 10 pins, which are pronged contacts.The chip is mounted by Surface Mount .This electrical device operates at 2V~5.5V volts.The number of channels is growing strong/weak: 2 .During operation, Mute, Shutdown, Thermal Protection can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.The device contains 10 pins.Amp parts is included in Audio/Video Amplifiers .The LM4911 family includes it.The chip should be mounted in the way of Surface Mount .This electronic part has a maximum output power of 145mW kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2V .There is a Single supply type on this electronic part.The electronic part is a member of the Boomer? series.
LM4911MM/NOPB Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
LM4911 family
145mW kWh per hour
Boomer? series
LM4911MM/NOPB Applications
There are a lot of Texas Instruments LM4911MM/NOPB audio amplifiers applications.
- High speed sample
- Radar
- Signal transformation
- Communication device
- Video conversion and routing
- Vehicle electronics
- Proportional operation circuits
- Medical instruments
- Proportional counter tubes
- Signal amplification
