LM49352RL/NOPB
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Tin/Silver (Sn/Ag) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM49352 |
| Output Type | 1-Channel (Mono) with Mono and Stereo Headphones |
| Interface | I2C, I2S, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Supply Current-Max | 1.5mA |
| Resolution | 3 B |
| Power Consumption | 5.97mW |
| Max Output Power | 1.4W |
| Signal to Noise Ratio (SNR) | 97 dB |
| Max Output Power x Channels @ Load | 1.4W x 1 @ 8 Ω; 65mW x 2 @ 32 Ω |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 6 |
| Filter | NO |
| Number of Analog Outputs | 4 |
| Height | 725μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA, DSBGA |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer®, PowerWise® |
| JESD-609 Code | e2 |
| Feature | Depop, Differential Inputs, I2C, I2S, Microphone, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
LM49352RL/NOPB Overview
This package is embedded in 36-WFBGA, DSBGA .Ideally, the chip should be packaged in a Tape & Reel (TR) case.Amp parts uses 1-Channel (Mono) with Mono and Stereo Headphones as the output.This electrical device has the type Class D .As part of the signal interface in a computer or other communication device, there are 36 pins.The electronic component is mounted in the way of Surface Mount .During operation, the value Depop, Differential Inputs, I2C, I2S, Microphone, Shutdown, Volume Control can be ensured.A temperature greater than -40°C~85°C TA should not be used.The LM49352 family contains this object.Amp parts is mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 1.4W kWh per hour.This is a member of the Boomer?, PowerWise? series.Supply currents are limited to 1.5mA .When the supply voltage is set to 5.5V , it operates at maximum capacity.A minimum supply voltage of 2.7V is required to operate it.An analog output can be sampled from numerical values that have been converted to voltages using the 2 DAC channels.The 6 analog transmissions combine an input signal with a carrier signal to adapt data.DCS outputs are provided by 4 analog outputs.
LM49352RL/NOPB Features
36-WFBGA, DSBGA package
LM49352 family
1.4W kWh per hour
Boomer?, PowerWise? series
LM49352RL/NOPB Applications
There are a lot of Texas Instruments LM49352RL/NOPB audio amplifiers applications.
- Test equipment
- Communication device
- Integrator and differentiator circuits
- Multiplication and division circuits
- Signal operation
- Test and measurement instruments
- Active probe
- Logarithmic and exponential operation circuits
- Addition and subtraction operation circuits
- Medical imaging
