LM5070MTC-50
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 1.8V~75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 580kHz |
| Base Part Number | LM5070 |
| Pin Count | 16 |
| Output Voltage | 3.3V |
| Output Type | Voltage |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Output Current | 100mA |
| Output Power | 13W |
| Max Output Voltage | 3.3V |
| Min Input Voltage | 1.85V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 75V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 48V |
| Switcher Configuration | SINGLE |
| Continuous Drain Current (ID) | 1mA |
| Internal Switch(s) | Both |
| Standards | 802.3af (PoE) |
| Drain to Source Resistance | 1Ohm |
| Duty Cycle | 50 % |
| Auxiliary Sense | No |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5070MTC-50 Overview
There is an embedded version of it in the Tube package.The packaging is in 16-TSSOP (0.173, 4.40mm Width)'s style.PoE controller type Controller (PD), DC/DC.Currently, there are a number of channels that are strong or weak: 1.For the sake of ensuring the reliability of the Po E controller, it functions at a temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 1.8V~75V.According to the base part number LM5070, its Po E controllers can be founded.Termination with a 16 termination involves terminating a transmission line with a power over ethernet controller of matching impedance.In addition, it comes with a 16 pin count.As Po E controller of Switching Regulator or Controllers, this Po E controller is included.A 16-pin design is used in it.There is a peak reflow temperature of 260 for this electrical ethernet power controller.Surface Mount is the direction it is mounted.The frequency of this electrical PoE ethernet controller is 580kHz.100mA possesses a high output current, which makes it possible for it to provide maximum design flexibility.A 13W watt power output is achieved by this ethernet over power controller.As a result of this power over ethernet controller's output voltage being 3.3V, this voltage is the output voltage.This power over ethernet PoE controller can accept voltages as high as 75V as input voltage.This power over the ethernet controller's minimal input voltage is 1.85V.
LM5070MTC-50 Features
Tube package
16 pin count
16 pins
The output current of 100mA
LM5070MTC-50 Applications
There are a lot of Texas Instruments LM5070MTC-50 Power Over Ethernet (PoE) Controllers applications.
- Power over Ethernet
- Dual Signature PD/Forced UPOE
- POS Terminals
- Security Cameras
- VoIP Phones
- Outdoor Security Camera Equipment
- Public Information Displays
- Higher Power Ethernet Powered Devices
- Industrial Automation Equipment
- Multiband access points
