LM5070MTC-50/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 2.2Ohm |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 1.8V~75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | LM5070 |
| Pin Count | 16 |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 100mA |
| Max Supply Current | 3mA |
| Output Power | 12.95W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 75V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Max Duty Cycle | 50 % |
| Standards | 802.3af (PoE) |
| Duty Cycle | 50 % |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5070MTC-50/NOPB Overview
PoE controller is part of the Tube package, which is included in the download.It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width).I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.There is a strong/weak growth in the number of channels: 1.Keeping its operating temperature at -40°C~125°C ensures PoE reliability.This electrical Po E controller receives its supply voltage from 1.8V~75V.According to the base part number LM5070, its Po E controllers can be founded.16 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.Count of 16 pins is included.Switching Regulator or Controllers includes this Po E controller in its package.It is designed with 16 pins.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.A Surface Mount-axis mount is used.1mA requires a supply current to function correctly.A 1MHz frequency is used for the operation of this electrical PoE ethernet controller.Because of its output current, 100mA is able to provide maximum design flexibility.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this PoE controller is 2.2Ohm (Ω). 12.95W is the output power of this ethernet over power controller.
LM5070MTC-50/NOPB Features
Tube package
16 pin count
16 pins
The output current of 100mA
2.2Ohm (Ω)
LM5070MTC-50/NOPB Applications
There are a lot of Texas Instruments LM5070MTC-50/NOPB Power Over Ethernet (PoE) Controllers applications.
- Wireless LAN Access Point/WiMAX? Base Station
- Dual Signature PD/Forced UPOE
- High Power Wireless Data Systems
- IEEE 802.3af Compliant PoE Powered Devices
- POS Terminals
- Multiband access points
- 4PPOE
- Pass-through System
- Power Modules
- Lighting
