LM5072MH-50/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 1.2Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9V~70V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4.4mm |
| Frequency | 1MHz |
| Base Part Number | LM5072 |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Max Supply Current | 3mA |
| Output Power | 12.95W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 100V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Max Duty Cycle | 80 % |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | Yes |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5072MH-50/NOPB Overview
As part of Tube, PoE controller is embedded.It is the way it is packaged that makes it 16-PowerTSSOP (0.173, 4.40mm Width).Controller (PD), DC/DC is the type of PoE controller.There is an increase in the number of channels strong/weak as follows: 1.Ensure the reliability of the PoE by operating it at -40°C~125°C.This electrical Po E controller requires a voltage supply of 9V~70V to operate.It is possible to find the Po E controllers of the base part number by using the base part number LM5072.A 16 termination involves terminating the transmission line with a power over ethernet controller of the same impedance as the line.A Po E controller like this is included in Switching Regulator or Controllers.A 16-pin design is used in it.The peak reflow temperature (Cel) of this electrical ethernet power controller is 260.In the way of Surface Mount, it is mounted.To work properly, 700μA needs to receive supply current.A 1MHz frequency is used for the operation of this electrical PoE ethernet controller.1.2Ohm (*) represents the PoE controller's resistance.The output power of this ethernet over power controller is 12.95W.
LM5072MH-50/NOPB Features
Tube package
16 pins
1.2Ohm (Ω)
LM5072MH-50/NOPB Applications
There are a lot of Texas Instruments LM5072MH-50/NOPB Power Over Ethernet (PoE) Controllers applications.
- Single-Port PSE Power Injectors
- RFID Readers
- Outdoor Security Camera Equipment
- Industrial Automation Equipment
- Single-Port PSE End-Point Applications
- Wireless LAN Access Point/WiMAX? Base Station
- High Temperature Industrial Applications
- Internet Appliances
- Non-Compliant, Application Specific Devices
- Midspan Applications
