LM5072MH-80
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9V~70V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Frequency | 645kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM5072 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.25V |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Nominal Supply Current | 700mA |
| Output Power | 25W |
| Power - Max | 12.95W |
| Current - Supply | 2mA Max |
| Input Voltage (Min) | 9V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.8A |
| Input Voltage (Max) | 70V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Standards | 802.3af (PoE) |
| Drain to Source Resistance | 700mOhm |
| Auxiliary Sense | Yes |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5072MH-80 Overview
It is included in the Tube package.In other words, 16-PowerTSSOP (0.173, 4.40mm Width) refers to the way in which it is packaged.I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.There is an increase in the number of channels strong/weak as follows: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 9V~70V.It is possible to find the Po E controllers of the base part number by using the base part number LM5072.In a 16 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.There is a maximum power of 12.95W Watts that can be generated by this electrical ethernet over power controller.The ethernet over power controller has 16 pins.Taking into account the supply current, 2mA Max is the value.It is included in Switching Regulator or Controllers.There are 16 pins on the board that are designed for it.There is a 260 thermal peak of this electrical ethernet power controller (Cel).Surface Mount is the direction it is mounted.The frequency of this electrical PoE ethernet controller is 645kHz.This electrical power over ethernet PoE controller can accept voltages as high as 70V as input voltage.For the power over the ethernet controller in question, the maximum voltage that can be output is 0.8A.This PoE controller requires a supply voltage of 15V to function properly.This ethernet over power controller has an output power of 25W watts.In this case, 1.25V is the output voltage of the power over ethernet controller.This power over ethernet devices requires a minimum input voltage of 9V.
LM5072MH-80 Features
Tube package
16 pin count
16 pins
LM5072MH-80 Applications
There are a lot of Texas Instruments LM5072MH-80 Power Over Ethernet (PoE) Controllers applications.
- WLAN Access Points
- Commercial Information Displays
- Pass-through System
- Switches
- IP Phone Power Management
- Lighting
- Security Cameras
- Power Modules
- Wireless LAN Access Point/WiMAX? Base Station
- Non-Compliant, Application Specific Devices
