LM5102SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5102 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5102SD/NOPB Overview
A higher level of flexibility is provided by its 10-WDFN Exposed Pad package.Tape & Reel (TR) is the packaging method.Surface Mount is mounted in the way of the device.A supply voltage of 9V~14V demonstrates its superiority.This device is designed with a N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.The configuration is based on 10 terminations.You will find various related parts under the base part number LM5102.Surface Mount is the way it takes to mount the device.When the device is designed, it has 10 pins.The device is specifically designed to function with a supply voltage of 12V V.As a maximum, there is 1.8A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.The number of component pins is 10.Maximum (Bootstrap) voltage can be up to 118V.In terms of its basis, there are 2 outputs integrated.The device is capable of delivering a current of 1.8A.To maintain higher stability, the supply current should always be 3mA.A quiescent current of 400μA is the current consumed by a part when left unaffected by external influences.
LM5102SD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5102SD/NOPB Applications
There are a lot of Texas Instruments LM5102SD/NOPB gate drivers applications.
- Isolated Gate Driver Supplies
- Motor Control
- Solar inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- RGB applications
- Smart Phones
- 3-Phase Motor Inverter Driver
- Active filtering
- AC-DC Inverters
- Line drivers
