LM5110-1SD/NOPB
| Parameters | |
|---|---|
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
LM5110-1SD/NOPB Overview
Its 10-WDFN Exposed Pad package is adopted for higher flexibility.There is a package in the form of Tape & Reel (TR).The device is mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 3.5V~14V.Gate type N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.The input type for this program is Non-Inverting.The configuration is based on 10 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5110.In this case, Surface Mount indicates how the device is to be mounted.As a result, it is configured with 10 pins when it is designed.The device is specifically designed to operate at 12V volts.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is a maximum output current of 5A.A board with 10 component pins is available.There are 2 outputs integrated for its basis.The output current supported by the device is 5A.Mosfet gate drivers is recommended to keep the supply current at 2mA to ensure greater stabilMosfet gate driversy.When no external influences are present, its quiescent current at 1mA refers to the current this part consumes.
LM5110-1SD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-1SD/NOPB Applications
There are a lot of Texas Instruments LM5110-1SD/NOPB gate drivers applications.
- UPS systems
- Power factor correction (PFC) circuits
- Refrigerator
- Multicolor LED/laser displays
- Pulse transformer drivers
- Commercial air-conditioning (CAC)
- Motor Drives
- Solar power supplies
- Digitally controlled power supplies
- Isolated Supplies for Motor Control
