LM5113SDE/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5113 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 100μA |
| Output Current | 5A |
| Propagation Delay | 30 ns |
| Supply Current-Max | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 4ns |
| Fall Time (Typ) | 4 ns |
| Turn-Off Delay Time | 2 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7ns 1.5ns |
| Channel Type | Independent |
| Turn On Time | 0.045 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.76V 1.89V |
| Turn Off Time | 0.045 µs |
| High Side Voltage - Max (Bootstrap) | 107V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5113SDE/NOPB Overview
There is greater flexibility with the 10-WDFN Exposed Pad package.A package of Cut Tape (CT) has been used.It's mounted on the way to Surface Mount.By using 4.5V~5.5V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~125°C TJ.Non-Inverting is the input type used in this program.It's configured with 10 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM5113.Mounting the device requires Surface Mount.As a result, it is configured with 10 pins when it is designed.Mosfet driver is designed specifically to run on 5V volts of power.There is a maximum output current of 5A that can be achieved.There are several useful electronic components within its subcategory MOSFET Drivers.Maximum (Bootstrap) voltage can be up to 107V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The device is capable of delivering a current of 5A.With its power supplies of 5V, it solves the problems of power supply for a variety of applications.Setting the operating supply voltage to 5V is recommended.The power supply voltage for this device is set to 100μA.Operation cannot exceed 3mA supply current.
LM5113SDE/NOPB Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 107V
LM5113SDE/NOPB Applications
There are a lot of Texas Instruments LM5113SDE/NOPB gate drivers applications.
- High current laser/LED systems
- Pulse transformer drivers
- Commercial and agricultural vehicles (CAV)
- Motor Drives
- Line drivers
- White Goods - Air Conditioner, Washing Machine,
- Refrigerator
- Automotive Applications
- DC/DC converters
- Motor controllers
