LM5114ASDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 310mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM5114 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 950μA |
| Output Current | 7.6A |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 12 ns |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 3.2ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 82ns 12.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 7.6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 7.6A |
| High Side Driver | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5114ASDX/NOPB Overview
Gate drivers provides greater flexibilGate driversy to use the 6-WDFN Exposed Pad package.A package of Tape & Reel (TR) has been used.This device is equipped with 1 drivers for its configuration.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 4V~12.6V V, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~125°C TJ.This program uses the input type of Inverting, Non-Inverting.It's configured with 6 terminations.The base part number LM5114 refers to a number of related parts.The pins are configured with 6 when designing the chip.The device is specifically designed to operate at 4.5V volts.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There are several useful electronic components found in its subcategory of MOSFET Drivers.In terms of its basis, there are 2 outputs integrated.An output current of 7.6A is supported.With a resistance of 310mOhm, it operates.
LM5114ASDX/NOPB Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
6 pins
Resistance of 310mOhm
LM5114ASDX/NOPB Applications
There are a lot of Texas Instruments LM5114ASDX/NOPB gate drivers applications.
- DC-DC Converters
- Active filtering
- Isolated switch mode power supplies (SMPS)
- Welding
- Industrial Modules
- High frequency line drivers
- Motor Drives
- Isolated Supplies for Motor Control
- Industrial Power Supplies
- Telecom switch mode power supplies
