Parameters |
Lifecycle Status |
NRND (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LMC6482 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
3/15V |
Operating Supply Current |
1.3mA |
Nominal Supply Current |
1.3mA |
Output Current |
30mA |
Slew Rate |
0.9V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.02pA |
Voltage - Supply, Single/Dual (±) |
3V~15.5V ±1.5V~7.75V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
110μV |
Gain Bandwidth Product |
1.5MHz |
Unity Gain BW-Nom |
1500 kHz |
Voltage Gain |
116.47dB |
Average Bias Current-Max (IIB) |
0.000004μA |
Power Supply Rejection Ratio (PSRR) |
65dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
16V |
Voltage - Input Offset |
3.7mV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000004μA |
Programmable Power |
NO |
Wideband |
NO |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMC6482IMMX Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 110μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 1.3mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 116.47dB. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 2 elements. The linear amplifier is packaged by using a TR axis.
LMC6482IMMX Features
8 Pins
supply voltage of 5V
116.47dB voltage gain
Output Type: Rail-to-Rail
LMC6482IMMX Applications
There are a lot of Texas Instruments LMC6482IMMX Instrumentational OP Amps applications.
- Gaming industry
- Fission chambers
- Mobile phone
- Band-stop filter
- Power generator
- Computer workstations
- Automation control systems
- Proportional counter tubes
- Car stereo
- Wireless base stations