LMC7101QM5X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LMC7101 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Output Current | 50mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~15.5V ±1.35V~7.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 110μV |
| Gain Bandwidth Product | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 110.63dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7101QM5X/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. In total, there are 5 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 3V. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 5 pins. Op amp ic rates 110μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 800μA. Keeping the voltage gain at 110.63dB is the best course of action. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There are 1 elements in total in this linear amplifier. To pack the operational amplifier ics, TR is adopted as the packing method. The Automotive, AEC-Q100 stands for the buffer op amp's serial number.
LMC7101QM5X/NOPB Features
5 Pins
supply voltage of 3V
110.63dB voltage gain
Output Type: Rail-to-Rail
LMC7101QM5X/NOPB Applications
There are a lot of Texas Instruments LMC7101QM5X/NOPB Instrumentational OP Amps applications.
- E-book readers
- Radiation thermometry transducers
- Professional videography
- Exponential operation circuits
- RF cable systems
- single/dual op amp sum and difference circuits
- Industrial control system
- Power control
- Integrator circuits
- Non-polarized electrodes
