LMC7221AIM5
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 45A |
| Base Part Number | LMC7221 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Circuits | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 7000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 30mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
LMC7221AIM5 Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.A comparator with an output type of Open Drain is being used.The part will be shipped by Tape & Reel (TR) .There are 5 terminals on the comparator.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .The device contains 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.In order to find a solution that meets your specific needs, search LMC7221 for more pin-to-pin solutions.A quiescent current of 14μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.An excess of current supply over 14μA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum of 40 fA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .The device is packaged in TR and is often used in ADC circuits.
LMC7221AIM5 Features
Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221AIM5 Applications
There are a lot of Texas Instruments LMC7221AIM5 linear comparators applications.
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- Wide Range VCO; MOS Clock Timers
- High-Speed Sampling Circuits
- Power management
- Mobile Communications
- Mobile Phones
- Set Top Boxes
- Battery-Powered Electronics
- Industrial
