LME49600TS/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Voltage - Supply | ±2.25V~18V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Base Part Number | LME49600 |
| Output Type | 1-Channel (Mono) |
| Number of Channels | 1 |
| Nominal Supply Current | 13.2mA |
| Output Current | 250mA |
| Slew Rate | 2000 V/μs |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 15V |
| Bandwidth | 180000 kHz |
| Gain Bandwidth Product | 180MHz |
| Voltage Gain | 0.09dB |
| Max Dual Supply Voltage | 18V |
| Max Output Power | 500mW |
| Min Dual Supply Voltage | 2.25V |
| Dual Supply Voltage | 15V |
| Input Bias Current | 5μA |
| Max Output Power x Channels @ Load | 500mW x 1 @ 32 Ω |
| Load Impedance | 32Ohm |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LME49600TS/NOPB Overview
In TO-263-6, D2Pak (5 Leads + Tab), TO-263BA is embedded this device.In this case, it is packaged as Tube .In 5 terminations, a transmission line is terminated with a device that matches its characteristic impedance.The output it is configured with uses 1-Channel (Mono) .This electrical device has the type Class AB .In a computer or other communications device, 5 pins are pronged contacts.The electronic component is mounted in the way of Surface Mount .There is ±2.25V~18V voltage supply to this electrical device.There are no channels on the device.Amp parts is possible to guarantee Short-Circuit and Thermal Protection when operating.No temperature higher than -40°C~85°C TA should be used for operations.The LME49600 family contains this object.The electronic component is mounted in the way of Surface Mount .This electronic part has a maximum output power of 500mW kWh per hour.The supply type of this electronic part is Dual .
LME49600TS/NOPB Features
TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package
LME49600 family
500mW kWh per hour
LME49600TS/NOPB Applications
There are a lot of Texas Instruments LME49600TS/NOPB audio amplifiers applications.
- Vehicle electronics
- Proportional counter tubes
- Active probe
- Semiconductor detectors
- Test and measurement instruments
- Logarithmic and exponential operation circuits
- Band-stop filter
- Portable electronic products powered by batteries
- High gain DC amplifier
- Proportional operation circuits
