LMH6654MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6654 |
| Pin Count | 5 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Output Current | 80mA |
| Slew Rate | 200V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 260MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 250000 kHz |
| Voltage Gain | 64dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6654MF/NOPB Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Voltage Feedback-types. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. The pins on this board total to 5 in total. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 5 pins. The input offset voltage is 1mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. A supply current of 4.5mA can be used to operate this linear amplifier. You should keep the voltage gain at 64dB for the time being. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 9V voltage. A TR-shaped amplifier is used to pack the buffer amps.
LMH6654MF/NOPB Features
5 Pins
supply voltage of 5V
64dB voltage gain
LMH6654MF/NOPB Applications
There are a lot of Texas Instruments LMH6654MF/NOPB Instrumentational OP Amps applications.
- Video conversion and routing
- Portable media players
- High input resistance broadband
- Radar
- Proportional operation circuits
- Automation control systems
- Medical imaging
- Signal transformation
- Weak signal detection
- Fission chambers
