banner_page

LMK03000DISQE/NOPB

3.3V Clock Conditioner 1.296GHz LMK03000 Clock Generators 48-WFQFN Exposed Pad 48 Terminals Surface Mount 3.15V~3.45V Tape & Reel (TR)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMK03000DISQE/NOPB
  • Package: 48-WFQFN Exposed Pad
  • Datasheet: -
  • Stock: 515
  • Description: 3.3V Clock Conditioner 1.296GHz LMK03000 Clock Generators 48-WFQFN Exposed Pad 48 Terminals Surface Mount 3.15V~3.45V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-WFQFN Exposed Pad
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
Type Clock Conditioner
Terminal Finish Matte Tin (Sn)
Voltage - Supply 3.15V~3.45V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number LMK03000
Output LVDS, LVPECL
Number of Outputs 9
Number of Circuits 1
Nominal Supply Current 86mA
Frequency (Max) 1.296GHz
Input LVCMOS, LVDS, LVPECL
Ratio - Input:Output 1:8
Power Consumption 1.18W
Primary Clock/Crystal Frequency-Nom 200MHz
PLL No
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
Height 800μm
Length 7mm
Width 7mm
Thickness 750μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMK03000DISQE/NOPB Overview


In order to package it as a clock IC, the Tape & Reel (TR) package is used. A Clock PLL is included with the 48-WFQFN Exposed Pad package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 48 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. LVCMOS, LVDS, LVPECL is designed for clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 1.296GHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3.15V~3.45V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. LVDS, LVPECL logic levels are supported by this RF synthesizer. As far as this electronic part is concerned, it can be classified as a Clock Conditioner component. It is possible to find its related electronic parts by searching for the base part number LMK03000. There is an available 48 pin on the clock generators. The output frequency is magnified as high as possible with 9 signal outputs.

LMK03000DISQE/NOPB Features


Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V

LMK03000DISQE/NOPB Applications


There are a lot of Texas Instruments LMK03000DISQE/NOPB Clock Generators applications.

  • Clock recovery
  • High-speed communication applications
  • Wireless handsets
  • Signal analyzer
  • Mechanical devices
  • FSK demodulators
  • Threshold extension
  • Radiotelephones
  • Main oscillator in receiver
  • Coherent carrier tracking

Write a review

Note: HTML is not translated!
    Bad           Good