banner_page

LMP2021MFE/NOPB

1 Channels 50mA per Channel 25pA 120 dB Instrumentational OP Amps 0.0003μA 2.2V~5.5V LMP2021 5 Pins SC-74A, SOT-753


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP2021MFE/NOPB
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 270
  • Description: 1 Channels 50mA per Channel 25pA 120 dB Instrumentational OP Amps 0.0003μA 2.2V~5.5V LMP2021 5 Pins SC-74A, SOT-753(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series LMP®
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Base Part Number LMP2021
Pin Count 5
Number of Channels 1
Operating Supply Current 1.1mA
Nominal Supply Current 1.1mA
Output Current 50mA
Slew Rate 2.6V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Zero-Drift
Common Mode Rejection Ratio 120 dB
Current - Input Bias 25pA
Voltage - Supply, Single/Dual (±) 2.2V~5.5V
Output Current per Channel 50mA
Input Offset Voltage (Vos) 5μV
Bandwidth 5MHz
Unity Gain BW-Nom 5000 kHz
Voltage Gain 160dB
Average Bias Current-Max (IIB) 0.0003μA
Power Supply Rejection Ratio (PSRR) 110dB
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Voltage - Input Offset 0.4μV
Low-Bias YES
Micropower NO
Programmable Power NO
Input Offset Current-Max (IIO) 0.0002μA
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP2021MFE/NOPB Overview


Op amp is packaged in SC-74A, SOT-753 case. Buffer amps of this type are called Zero-Drift-types. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. A total of 5 pins are located on this board. This linear amplifier should be powered by an 2.5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 5-pin op amp ic is included in the package. There is an input offset voltage of 5μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 1.1mA. The voltage gain should stay at 160dB. As far as the device is concerned, buffer amplifier has 1 channels. TR is adopted to pack the instrumentation amplifier. As the name implies, LMP? refers to the series of the buffer op amp.

LMP2021MFE/NOPB Features


5 Pins
supply voltage of 2.5V
160dB voltage gain

LMP2021MFE/NOPB Applications


There are a lot of Texas Instruments LMP2021MFE/NOPB Instrumentational OP Amps applications.

  • Automation control systems
  • Video data acquisition
  • Strain gauges
  • Switching amplifier
  • Voltage regulation circuit
  • Navigation
  • Fission chambers
  • Biopotential
  • Weak signal detection
  • Video conversion and routing

Write a review

Note: HTML is not translated!
    Bad           Good