banner_page

LMV7219M7X/NOPB

Surface Mount Tape & Reel (TR) 68mA mA 12 ns μs Linear Comparators 950nA pA 1.8mA μA 6mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMV7219M7X/NOPB
  • Package: 5-TSSOP, SC-70-5, SOT-353
  • Datasheet: -
  • Stock: 970
  • Description: Surface Mount Tape & Reel (TR) 68mA mA 12 ns μs Linear Comparators 950nA pA 1.8mA μA 6mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Number of Pins 5
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Base Part Number LMV7219
Pin Count 5
Output Type Push-Pull, Rail-to-Rail
Operating Supply Voltage 3V
Number of Elements 1
Nominal Supply Current 1.8mA
Output Current 68mA
Max Supply Current 1.8mA
Propagation Delay 20 ns
Quiescent Current 1.8mA
Response Time 12 ns
Common Mode Rejection Ratio 85 dB
Voltage - Supply, Single/Dual (±) 2.7V~5V
Input Offset Voltage (Vos) 6mV
Power Supply Rejection Ratio (PSRR) 85dB
Max Input Current 950nA
Input Bias Current 950nA
Voltage - Input Offset (Max) 6mV @ 5V
Current - Input Bias (Max) 0.95μA @ 5V
Hysteresis 7.5mV
CMRR, PSRR (Typ) 85dB CMRR, 85dB PSRR
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMV7219M7X/NOPB Overview


For convenience, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .This comparator is of the Push-Pull, Rail-to-Rail output type.Ready for shipping in Tape & Reel (TR) package.The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .The total number of elements is 1 .There are 5 pins on this board.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.5 pins are available on the comparator.Try search LMV7219 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 1.8mA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 1.8mA when using the device.If the current supply exceeds 1.8mA , the comparator might be damaged.You are allowed to input a maximum current of 950nA into the device.Normal operation requires 3V operating supply voltage.With a TR package, this device is designed for general use (usually in ADC circuits).

LMV7219M7X/NOPB Features


Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.8mA

LMV7219M7X/NOPB Applications


There are a lot of Texas Instruments LMV7219M7X/NOPB linear comparators applications.

  • General-Purpose, Low-Voltage Applications
  • Power Supervision
  • Point of load regulators
  • Alarm and Monitoring Circuits
  • Multivibrators and High-Voltage Digital Logic Gates
  • Handheld Instruments
  • Body Control Modules
  • Security Detection Systems
  • Pulse, Squarewave, and Time Delay Generators
  • Automatic Test Equipment

Write a review

Note: HTML is not translated!
    Bad           Good