LMV761MA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV761 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Power Supplies | 2.7/5V |
| Nominal Supply Current | 700μA |
| Output Current | 40mA |
| Max Supply Current | 700μA |
| Propagation Delay | 225 ns |
| Quiescent Current | 700μA |
| Response Time | 225 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.000005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 50pA |
| Input Bias Current | 50pA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 110dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV761MA Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type of this comparator is Push-Pull .We ship the part through Tube .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .A total of 1 elements can be found in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 8 pins on the comparator.Search LMV761 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 700μA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 700μA for normal use.If the current supply exceeds 700μA , the comparator could malfunction.There is sufficient power to run the device from 2.7/5V power supplies.There is a maximum current that can be input into the device of 50pA .For normal operation, the operating supply voltage must be 3V .
LMV761MA Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV761MA Applications
There are a lot of Texas Instruments LMV761MA linear comparators applications.
- Motor drives
- Security Detection Systems
- Zero-Crossing Detectors
- Wearable Devices
- Wide Range VCO; MOS Clock Timers
- Analog front end
- Power management
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- Set Top Boxes
