LMV762MAX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMV762 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Nominal Supply Current | 450μA |
| Output Current | 40mA |
| Max Supply Current | 1.4mA |
| Propagation Delay | 225 ns |
| Quiescent Current | 700μA |
| Response Time | 225 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 50pA |
| Input Bias Current | 50pA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 110dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV762MAX Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type Push-Pull output on this device.This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .Electronic comparator has a total of 2 elements.Electronic comparator includes 8 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.8 pins are present on the comparator.Try search LMV762 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 700μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 450μA when using the device.Current supply exceeding 1.4mA could cause disfunction of the compartator.You are allowed to input a maximum current of 50pA into the device.In order to operate normally, a supply voltage of 0 is required.
LMV762MAX Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV762MAX Applications
There are a lot of Texas Instruments LMV762MAX linear comparators applications.
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications
- Metering Systems
- Limit Comparators
- Simple Analog-to-Digital Converters (ADCs)
- Power management
- RC Timers
- Window Comparators
- Infotainment & cluster
