LMV793MF/NOPB
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMV793 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 60mA |
| Slew Rate | 35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.35mV |
| Bandwidth | 88MHz |
| Unity Gain BW-Nom | 88000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
LMV793MF/NOPB Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. In this case, there are 5 pins on the board. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 1.35mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . This op amp can operate from a supply current at 1.15mA. 110dB should be the voltage gain. Op amp ic has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted.
LMV793MF/NOPB Features
5 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
LMV793MF/NOPB Applications
There are a lot of Texas Instruments LMV793MF/NOPB Instrumentational OP Amps applications.
- Polarized electrodes
- Integrator circuits
- Semiconductor detectors
- Strain gauges
- Portable docking station
- Non-polarized electrodes
- Automation control systems
- Video data acquisition
- Power transmission
- Radiation thermometry transducers
