LMV793MFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMV793 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 60mA |
| Slew Rate | 35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.35mV |
| Gain Bandwidth Product | 88MHz |
| Unity Gain BW-Nom | 88000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | YES |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV793MFX/NOPB Overview
Op amp is packaged in SC-74A, SOT-753 case. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 5. The pins on this board total to 5 in total. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are included on the operational amplifiers. The input offset voltage is 1.35mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 1.15mA. 110dB should remain the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier consists of 1 different elements in total. TR is adopted to pack the instrumentation amplifier.
LMV793MFX/NOPB Features
5 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
LMV793MFX/NOPB Applications
There are a lot of Texas Instruments LMV793MFX/NOPB Instrumentational OP Amps applications.
- Communication
- Wireless base stations
- Signal operation
- Thermocouples
- Division circuits
- Scintillation detectors
- Navigation
- High speed sample
- Vehicle electronics
- Polarized electrodes
