banner_page

LMX2531LQ2265E/NOPB

3V Frequency Synthesizer (RF) LMX2531 Clock Generators 36 Pins 36-WFQFN Exposed Pad 36 Terminals Surface Mount 2.8V~3.2V Tape & Reel (TR)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMX2531LQ2265E/NOPB
  • Package: 36-WFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 261
  • Description: 3V Frequency Synthesizer (RF) LMX2531 Clock Generators 36 Pins 36-WFQFN Exposed Pad 36 Terminals Surface Mount 2.8V~3.2V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 36-WFQFN Exposed Pad
Number of Pins 36
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 36
Type Frequency Synthesizer (RF)
Subcategory PLL or Frequency Synthesis Circuits
Voltage - Supply 2.8V~3.2V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Frequency 2.4GHz
Base Part Number LMX2531
Output CMOS
Pin Count 36
Number of Outputs 1
Operating Supply Voltage 3V
Supply Voltage-Max (Vsup) 3.2V
Power Supplies 3V
Supply Voltage-Min (Vsup) 2.8V
Operating Supply Current 32mA
Nominal Supply Current 49mA
Input Clock
Ratio - Input:Output 2:2
Power Consumption 114mW
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height 800μm
Length 6mm
Width 6mm
Thickness 800μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMX2531LQ2265E/NOPB Overview


Tape & Reel (TR)-method packaging is used for clock ICs. A Clock PLL is included with the 36-WFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 36 terminations can be found in frequency synthesizer. Clock generator ics require a voltage of 3V. In this case, Clock is designed to be the input of the clock generator. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.2V of power. For safety reasons, this frequency synthesizer should have a voltage supply above 2.8V. There are 2.8V~3.2V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in CMOS logic that can be used with this clock generator. This electronic component is usually classified as a Frequency Synthesizer (RF) component. In this IC, a 36-bit frequency generator is designed specifically for use in microprocessors. Related electrical parts can be found for the base part number LMX2531. There are a number of 36 pins that are available on the clock generators. Time clock generator can handle a voltage of 3V as the supply voltage. And basically, this clock generator is often classified as a kind of PLL or Frequency Synthesis Circuits. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. At a frequency of 2.4GHz, frequency generator is capable of achieving high efficiency. For the clock time generator to function properly, 32mA of supply current must be provided.

LMX2531LQ2265E/NOPB Features


Available in the 36-WFQFN Exposed Pad
Supply voltage of 3V
Operating supply voltage of 3V

LMX2531LQ2265E/NOPB Applications


There are a lot of Texas Instruments LMX2531LQ2265E/NOPB Clock Generators applications.

  • Frequency synthesis
  • Cell phones
  • Fiber Channel
  • Clock signals to the high-speed Digital RF circuits
  • Carrier synchronization in wired communication
  • Time to digital converters
  • VSAT (Small Ground Satellite Station)
  • Radiotelephones
  • Infotainment systems
  • Vector network analyzers (VNA)

Write a review

Note: HTML is not translated!
    Bad           Good