LNK501GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 5.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 5.6V |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.06mA |
| Output Current | 267mA |
| Output Power | 3W |
| Input Voltage (Min) | 5.5V |
| Topology | Flyback |
| Frequency - Switching | 30kHz~42kHz |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.655mm |
| Width | 6.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK501GN-TL Overview
It is embedded in package 8-SMD (7 Leads), Gull Wing .There is a AC/DC power converter of Tape & Reel (TR) available.Surface Mount is mounted in the way of this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.At this point, the switching frequency reaches 30kHz~42kHz .As a result, it has had 7 terminations.The ac-dc converter has 8 pins.It is suitable for mounting by Surface Mount .It belongs to the family of LinkSwitch? manufacturers.There are 1 outputs to run.We are setting the output current to 267mA .The voltage output by this AC/DC converter is 5.6V .Unique techniques can be used to ensure input voltage at the maximum value of 6V .Coverters generate 3W in terms of output power.A minimum voltage supply across the converter is 85V .This converter can operate at a maximum supply voltage of 265V .
LNK501GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 30kHz~42kHz
Output Current at 267mA
LNK501GN-TL Applications
There are a lot of Power Integrations LNK501GN-TL AC DC Converters applications.
- Portable audio
- Universal Off-Line Power Supplies
- Battery chargers for media tablets
- Standby Power Supplies
- Battery chargers for cordless
- MP3
- Standby Power for General Off-Line Applications
- Home Appliance Applications
- Universal input AC/DC adapters (15W - 45W)
- Industrial controls
