LNK562DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 1.9W |
| Max Power Dissipation | 1.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 220μA |
| Output Power | 1.9W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.2A |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 230V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK562DG Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.In Tube AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.At this point, the switching frequency reaches 66kHz .There are a total of 7 terminations in it.On this ac/dc converter, there are 7 pins.Up to 8/7 pins are present on the ac-dc converter.It belongs to a manufacturer family of LinkSwitch?-LP .In this AC to DC transformer, there are 1 outputs to run.This AC/DC converter produces a voltage of 6V as its output.Ac to dc inverters can be supplied with a maximum current of 0.2A .Here is the standard for REACH SVHC : No SVHC .An input voltage of 265V is available for powering the AC to DC converter.A coverter produces 1.9W watts of output power.If the input voltage is less than 85V V, the AC to DC inverter can be used.A minimum voltage of 85V is required across the converter.This converter can operate at a maximum supply voltage of 230V .Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
LNK562DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 66kHz
With 7 pins
LNK562DG Applications
There are a lot of Power Integrations LNK562DG AC DC Converters applications.
- AC?DC USB chargers for Cell Phones
- PDAs
- Appliances
- Standby Power Supply
- LED Driver
- Utility meters
- AC/DC Adaptors/Chargers for E-books
- Set -Top Box (STB) Power Supply
- ATX/BTX Auxiliary Power
- Appliance Power Supplies
