LNK563PN
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Output Current | 148mA |
| Output Power | 2.1W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 83kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Max Output Current | 375mA |
| Min Supply Voltage | 50V |
LNK563PN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube case, the ac dc converter is available.Through Hole mounts this AC/DC converter.The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .There are a total of 7 terminations.It contains 8 pins.There are 8 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Through Hole .It is a member of LinkSwitch?-LP manufacturer family.There are 1 outputs to be processed.Current output is set to 148mA .There is 5.8V voltage output from it.This power AC DC is capable of reaching high efficiency when operating at a frequency of 83kHz .You are able to read the REACH SVHC standard at: No SVHC .It is available to power the AC to DC converter input voltage under 265V .2.1W is the output power of a coverter.It is possible to use the AC to DC inverter with an input voltage less than 85V V.A minimum voltage supply across the converter is 85V .There is 265V maximum supply voltage across the converter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .There is 50V minimum supply voltage requirement for this AC to DC power supply.Adjustable is the output it is configured with.
LNK563PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 148mA
Output Type : Adjustable
LNK563PN Applications
There are a lot of Power Integrations LNK563PN AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- RCC SMPS
- Set-top boxes
- Battery Chargers
- Portable Apparatus
- Air conditioners
- Linear Adapter Replacements
- Industrial controls
- Auxiliary Power Supply
- Standby Power Supply
