LNK614DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 4.1W |
| Max Power Dissipation | 4.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 267mA |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Power Dissipation | 3.5W |
| Output Current | 600mA |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 55% |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK614DG Overview
8-SOIC (0.154, 3.90mm Width), 7 Leads is the package in which the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter uses a type ANALOG CIRCUIT analog integrated circuit.Up to 85kHz is the switching frequency.A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.The ac-dc converter has 8 pins.The ac dc converters are suitable to mount by Surface Mount .It is a member of LinkSwitch?-II manufacturer family.The number of outputs to run is 1 .Current output is set to 600mA .There is 700V voltage output from it.This power AC DC is capable of reaching high efficiency when operating at a frequency of 65kHz .You are able to read the REACH SVHC standard at: No SVHC .A minimum voltage supply across the converter is 85V .Across the converter, a maximum supply voltage of 265V may be applied.The AC to DC power converter's input voltage (AC) should be below 265V .
LNK614DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 600mA
LNK614DG Applications
There are a lot of Power Integrations LNK614DG AC DC Converters applications.
- Utility meters
- Standby Power Supplies
- Appliance Power Supplies
- USB-PD 2.0
- Appliances
- Consumer electronics
- Switching AC-DC Charger
- Small off-line low voltage power supplies
- Cleaners
- Adapter/Charger for Cordless Phones
