LNK6764V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.3mA |
| Output Current | 15μA |
| Output Power | 16W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6764V Overview
In the package 12-SDIP (0.412, 10.46mm) Exposed Pad , the ac to dc converter is embedded.Tube case is available for the ac dc converter.Through Hole mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .ANALOG CIRCUIT analog ICs are employed in this AC DC converter.There is 120kHz~136kHz switching frequency.A total of 11 terminations have been recorded.It contains 11 pins.It is a member of LinkSwitch?-HP manufacturer family.Switching Regulator or Controllers contains the ac to dc conversions.There is 15μA output current set.REACH SVHC standard can be found at No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.It is assumed that a coverter generates 16W as its output power.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.A AC to DC power converter's input voltage (AC) should not exceed 265V .
LNK6764V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6764V Applications
There are a lot of Power Integrations LNK6764V AC DC Converters applications.
- Auxiliary Power Supply
- Linear Adapter Replacements
- AC/DC Adaptors/Chargers for PDAs
- Appliance Power Supplies
- AC/DC LED Driver applications
- ATX/BTX Auxiliary Power
- Humidifier
- Standby and Auxiliary Power Supplies
- Adapters
- Automotive Telematics
