banner_page

LNK6765E

6 Terminations6 Pin AC to DC power converterLinkSwitch?-HP Series 120kHz~136kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK6765E
  • Package: 7-SIP, 6 Leads, Exposed Pad, Formed Leads
  • Datasheet: PDF
  • Stock: 581
  • Description: 6 Terminations6 Pin AC to DC power converterLinkSwitch?-HP Series 120kHz~136kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Surface Mount NO
Number of Pins 6
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2014
Series LinkSwitch™-HP
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
HTS Code 8542.39.00.01
Subcategory Switching Regulator or Controllers
Power Rating 45W
Max Power Dissipation 59W
Terminal Position ZIG-ZAG
Number of Functions 1
Terminal Pitch 1.27mm
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 1.4mA
Output Current 15μA
Output Power 40W
Topology Flyback
Min Input Voltage 85V
Control Mode CURRENT-MODE
Frequency - Switching 120kHz~136kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Duty Cycle 64%
Output Isolation Isolated
Voltage - Breakdown 650V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Width 2.01mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LNK6765E Overview


In the package 7-SIP, 6 Leads, Exposed Pad, Formed Leads , the ac to dc converter is embedded.The AC/DC power converter type is Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.When the switching frequency reaches 120kHz~136kHz , the circuit is closed.As a result, it has a total of 6 terminations.A ac/dc converter with 6 pins is available.The product is acdc converter of the LinkSwitch?-HP manufacturer family.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 15μA .You can read the standard of REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .In the AC to DC transformer of a coverter, the output power generated is 40W .A voltage of less than 85V V can be used with the AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .

LNK6765E Features


Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA

LNK6765E Applications


There are a lot of Power Integrations LNK6765E AC DC Converters applications.

  • LED Driver
  • Utility meters
  • Adapters
  • Air conditioners
  • AC/DC Adaptors/Chargers for E-books
  • Standby Power Supplies
  • Standby Power Supply
  • Chargers for cell/cordless phones
  • Portable audio
  • AC-DC Output Power Conversion Applications

Write a review

Note: HTML is not translated!
    Bad           Good