LP39542TL/NOPB
| Parameters | |
|---|---|
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 400mA |
| Max Supply Current | 1mA |
| Voltage - Output | 4V~5.3V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 900mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 13 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.675mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA |
| Number of Pins | 36 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP39542 |
| Pin Count | 36 |
| Number of Outputs | 13 |
| Power Supplies | 2.83.6V |
LP39542TL/NOPB Overview
Space is saved using its 36-WFBGA package. It has 13 outputs for LED drivers.Surface Mount is used to mount the led light driver.There is no doubt that this is a very efficient and reliable DC DC Regulator.The led light driver is capable of operating at the operating temperature of -30°C~85°C TA.Backlight, Camera Flash has significant advantages.A termination of 36 is used to operate the LED driver.This LED driver is configured with a base of 36 pins.Undetermined failures may occur if the voltage supply falls below 3V.The number of segments is 13.It has been mounted on Surface Mount.You can find this LED driver under the base part number LP39542.The supply voltage of 5.5V is an acceptable maximum value.The output voltage is 4V~5.3V.In addition, it is equipped with a total of 36 pins.As a result, its characteristics can also be categorized as Display Drivers.It operates with the minimal input voltage of 2.7V.This system is designed to operate at a minimum voltage of 2.7V to achieve maximum efficiency.The maximum supply current is 5.5V.As long as the maximum supply current is less than 1mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 400mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 2MHz.
LP39542TL/NOPB Features
Available in the 36-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
LP39542TL/NOPB Applications
There are a lot of Texas Instruments LP39542TL/NOPB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED headlights
- Amusement Machines
- Replacement lamps
- Architectural lighting
- Down lighting
- Gallery lighting
- General lighting
- LED Lightings for Industrial Equipment
- Medical surgery lighting
