LPV358DDUR

72mA per Channel 2nA 50 dB Instrumentational OP Amps 0.06μA 3V 2.7V~5V LPV358 8 Pins 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LPV358DDUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 157
Description: 72mA per Channel 2nA 50 dB Instrumentational OP Amps 0.06μA 3V 2.7V~5V LPV358 8 Pins 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	LPV358
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	15μA
Nominal Supply Current	20mA
Slew Rate	0.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	2nA
Voltage - Supply, Single/Dual (±)	2.7V~5V
Output Current per Channel	72mA
Input Offset Voltage (Vos)	7mV
Bandwidth	237 kHz
Unity Gain BW-Nom	237 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.06μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	1.5mV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.05μA
Programmable Power	NO
Power	NO
Height Seated (Max)	0.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)

LPV358DDUR Overview

The linear amplifier is packaged in a 8-VFSOP (0.091, 2.30mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 15μA . Keeping the voltage gain at 100dB is the best course of action. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TAPE AND REEL.