LT1178ACN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LT1178 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 16μA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 93 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Input Offset Voltage (Vos) | 30μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 116.9dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 80μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Nominal Gain Bandwidth Product | 85 kHz |
| Height Seated (Max) | 4.445mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1178ACN8#PBF Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. Op amp rates 30μV as input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Operational amplifier can operate supply current at 16μA. There should be no change in the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. There is a rating of 2 for the operating supply voltage of the buffer op amp.
LT1178ACN8#PBF Features
8 Pins
supply voltage of 15V
116.9dB voltage gain
LT1178ACN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1178ACN8#PBF Instrumentational OP Amps applications.
- Micro signal measurement
- Video amplifiers
- Integrator circuits
- Voltage regulation circuit
- Weighing systems
- Oscilloscopes
- High-frequency data acquisition systems
- Precision measurement
- Hand-held batteries
- Signal transformation
