LT1260CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1260 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 15mA |
| Slew Rate | 1600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 20μA |
| Voltage - Supply, Single/Dual (±) | 4V~30V ±2V~15V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 69dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 90μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | YES |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1260CN#PBF Overview
There is a 16-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Current Feedback-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 16 terminations. Buffer amplifier has a total of 16 pins. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 16-pin op amp ic is included in the package. There is an input offset voltage of 2mV for this buffer op amp. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 5mA . Keeping the voltage gain at 69dB is the best course of action. For the operating supply voltage of the op amp ic, there is a rating of 3.
LT1260CN#PBF Features
16 Pins
supply voltage of 15V
69dB voltage gain
LT1260CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1260CN#PBF Instrumentational OP Amps applications.
- Multiplication circuits
- Signal operation
- Instrumentation
- Cinema or auditorium audio system
- Car stereo
- Large motor controllers
- PDA
- Differentiator circuits
- Video data acquisition
- RF cable systems
