LT1367CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1367 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Power Supplies | 3/5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 370μA |
| Supply Current-Max | 2.3mA |
| Slew Rate | 0.13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~30V ±0.9V~15V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 400 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 400 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Nominal Gain Bandwidth Product | 400 kHz |
| Height | 1.48mm |
| Length | 8.74mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1367CS#PBF Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. The number of terminations is approaching the 14 mark. A total of 14 pins are located on this board. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. Op amp rates 150μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using a supply current of 370μA , this buffer op amp will be able to operate. You should keep the voltage gain at 126.02dB for the time being. On the buffer amps, there are 4 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 28V voltage.
LT1367CS#PBF Features
14 Pins
supply voltage of 15V
126.02dB voltage gain
Output Type: Rail-to-Rail
LT1367CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1367CS#PBF Instrumentational OP Amps applications.
- Voltage regulation circuit
- Blood pressure sensors
- Oscilloscopes
- earphone
- Semiconductor detectors
- Automatic control
- Portable media players
- Weighing systems
- Active probe
- High/low-pass filter circuit
