LT1394CMS8#PBF
| Parameters | |
|---|---|
| Quiescent Current | 8.5mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 2.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 64.08dB |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 6V |
| Input Bias Current | 4.5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 8.5mA |
| Voltage - Input Offset (Max) | 2.5mV @ ±5V |
| Current - Input Bias (Max) | 4.5μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1394 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Output Current | 20mA |
| Propagation Delay | 9 ns |
LT1394CMS8#PBF Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.This comparator is of the CMOS, Complementary, TTL output type.This device is designed in Tube case.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical with Latch comparator.There are a total of 1 elements in it.There are 8 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LT1394 .There is a quiescent current of 8.5mA in this comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5/+-5V power supplies.From the voltage formula, the voltage gain of the part is 64.08dB .The comparator has a maximum supply voltage of 10V .This comparator allows minimum supply voltage of 4.5V .The part belongs to the UltraFast? series of comparator parts.
LT1394CMS8#PBF Features
CMOS, Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 8.5mA
Voltage Gain: 64.08dB
LT1394CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1394CMS8#PBF linear comparators applications.
- Alarm and Monitoring Circuits
- Analog front end
- Threshold Detectors
- Infotainment and Clusters
- General-Purpose, Low-Voltage Applications
- Power Supervision
- Security Detection Systems
- System control and monitoring
- Self-diagnostics
- Hand-Held Electronics
