Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2001 |
Series |
Over-The-Top® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT1494 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Number of Circuits |
1 |
Operating Supply Current |
1.4μA |
Supply Current-Max |
0.0024mA |
Slew Rate |
0.001V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
25pA |
Voltage - Supply, Single/Dual (±) |
2.2V~36V ±1.1V~18V |
Output Current per Channel |
1.5mA |
Input Offset Voltage (Vos) |
150μV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
2.7 kHz |
Voltage Gain |
113.98dB |
Power Supply Rejection Ratio (PSRR) |
90dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
200μV |
Low-Bias |
NO |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.36μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
2.7 kHz |
Wideband |
NO |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LT1494CMS8#TRPBF Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. The input offset voltage is 150μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4μA and 10 . It is a member of the 113.98dB's 113.98dB family. This op amp ic has 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There is a rating of 1 for the operating supply voltage of the buffer op amp. TAPE AND REEL is adopted to pack the instrumentation amplifier. This buffer amplifier is assigned within the Over-The-Top? series by its manufacturer.
LT1494CMS8#TRPBF Features
8 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
LT1494CMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1494CMS8#TRPBF Instrumentational OP Amps applications.
- Commercial audio systems
- Television broadcasting equipment
- High/low-pass filter circuit
- Switching amplifier
- Tablets
- Blood pressure sensors
- Communication device
- Television
- Gaming industry
- Fission chambers