LT1721IGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | UltraFast™ |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LT1721 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Output Current | 20mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 7mA |
| Supply Current-Max | 28mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 7mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| Hysteresis | 7mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LT1721IGN Overview
A convenient packaging is provided in the form of 16-SSOP (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Rail-to-Rail, TTL is being used.This chip is designed with the Tube package.As you can see, the comparator has16 terminals.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .This element consists of 4 elements in total.The device is equipped with 16 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 16 pins.Search LT1721 to find more pin-to-pin solutions.There is a quiescent current of 7mA in this comparator.The device can be operated with 5V power supplies.With this part, a minimum current of 28mA can be supplied.Comparator electronics is part of the UltraFast? comparator series.
LT1721IGN Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 7mA
LT1721IGN Applications
There are a lot of Linear Technology/Analog Devices LT1721IGN linear comparators applications.
- Body Control Modules
- Multivibrators and High-Voltage Digital Logic Gates
- Consumer Medical Electronics
- Motor drives
- Metering Systems
- Battery management and protection
- General-Purpose, Low-Voltage Applications
- Building automation
- Set Top Boxes
- Mobile Communications
