Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-5 Thin, TSOT-23-5 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LT1797 |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Operating Supply Current |
1.4mA |
Supply Current-Max |
3mA |
Slew Rate |
2.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Buffer |
Common Mode Rejection Ratio |
64 dB |
Current - Input Bias |
150nA |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±1.35V~6V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
1.5mV |
Gain Bandwidth Product |
11MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
11000 kHz |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
80dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.3V |
Voltage - Input Offset |
1mV |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Nominal Gain Bandwidth Product |
10MHz |
Wideband |
NO |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LT1797CS5#TRMPBF Overview
There is a SOT-23-5 Thin, TSOT-23-5 case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 5 mark. The pins on this board total to 5 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 5 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1.5mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. A supply current of 1.4mA can be used to operate this linear amplifier. Keeping the voltage gain at 120dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There is a rating of 1 for the operating supply voltage of the buffer op amp. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
LT1797CS5#TRMPBF Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LT1797CS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1797CS5#TRMPBF Instrumentational OP Amps applications.
- Wireless base stations
- High-frequency data acquisition systems
- Video amplifiers
- Weighing systems
- Mobile phone
- Semiconductor detectors
- Fast A/D and D/A converters
- High/low-pass filter circuit
- Power control
- Multiplication circuits