LT1801IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1801 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 1.8mA |
| Slew Rate | 25V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 2.3V~12.6V ±1.15V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 700μV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 65000 kHz |
| Voltage Gain | 98.59dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 75μV |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1801IDD#PBF Overview
Packaged in a 8-WFDFN Exposed Pad case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 700μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 1.8mA supply current, this operational amplifier ics can be operated. Maintain 98.59dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LT1801IDD#PBF Features
8 Pins
supply voltage of 5V
98.59dB voltage gain
Output Type: Rail-to-Rail
LT1801IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1801IDD#PBF Instrumentational OP Amps applications.
- Semiconductor detectors
- Thermocouples
- Broadcasting
- Automotive sensors
- Home audio systems
- Industrial applications including automation
- Signal filtering
- Digital cameras
- Polarized electrodes
- Active probe
