LT1815IS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1815 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 6.5mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 220000 kHz |
| Voltage Gain | 66.02dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Bias Current-Max (IIB) @25C | 8μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 220MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1815IS5#TRMPBF Overview
A SOT-23-5 Thin, TSOT-23-5 case is used to package the op amp. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 5. There are a total of 5 pins on this op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 5 pins. There is an input offset voltage of 1.5mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. Operational amplifier can operate supply current at 6.5mA. 66.02dB should remain the voltage gain. The buffer amp consists of 1 circuits in total. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
LT1815IS5#TRMPBF Features
5 Pins
supply voltage of 5V
66.02dB voltage gain
LT1815IS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1815IS5#TRMPBF Instrumentational OP Amps applications.
- Signal filtering
- Digital cameras
- High-frequency data acquisition systems
- Signal transformation
- Biopotential
- Weak signal detection
- Video conversion and routing
- Tablets
- Hand-held batteries
- Large motor controllers
