LT1991AIMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 1.17MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1991 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 130μA |
| Slew Rate | 0.12V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2.5nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 21mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 560 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 560 kHz |
| Average Bias Current-Max (IIB) | 0.0075μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 15μV |
| -3db Bandwidth | 110kHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 560 kHz |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1991AIMS#PBF Overview
In order to protect the op amps, a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used. This is a Programmable Gain type op amp. Instrumentation amplifier is delivered in a Tube case. A total of 10 terminations have been reported in the past few weeks. In this case, there are 10 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 10 pins. Op amp ic rates 50μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 130μA volt supply current is needed for this linear amplifier to operate. 1 channels are available on the instrumentation amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. Instrumentation amplifier resistance should stay within the range of 1.17MOhm.
LT1991AIMS#PBF Features
10 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
Resistance of 1.17MOhm
LT1991AIMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1991AIMS#PBF Instrumentational OP Amps applications.
- Home audio systems
- Communication device
- Video computer boards
- Television
- Exponential operation circuits
- Proportional counter tubes
- Fast A/D and D/A converters
- Commercial audio systems
- Band-pass filter
- Precision measurement
