LT6105HMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6105 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 36V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 300μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 94 dB |
| Voltage - Supply, Single/Dual (±) | 2.85V~36V ±1.425V~18V |
| Output Current per Channel | 1mA |
| Input Offset Voltage (Vos) | 300μV |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Voltage - Input Offset | 100μV |
| Nominal Gain Bandwidth Product | 100 kHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LT6105HMS8#TRPBF Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Current Sense-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 12V battery. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 300μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 300μA . There are 1 circuits on this op amp. There is a rating of 1 for the operating supply voltage of the buffer op amp. Besides the analog ICs used in this instrumentation amplifier, there is also another type of analog IC called ANALOG CIRCUIT IC.
LT6105HMS8#TRPBF Features
8 Pins
supply voltage of 12V
LT6105HMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6105HMS8#TRPBF Instrumentational OP Amps applications.
- Comparator
- Tablets
- Polarized electrodes
- Division circuits
- RF cable systems
- Medical instruments
- Wireless base stations
- Automation control systems
- Medical imaging
- Ultrasound transducers
