LTC1441CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1441 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Power Dissipation | 500mW |
| Output Current | 20μA |
| Max Supply Current | 5.7mA |
| Propagation Delay | 15 μs |
| Quiescent Current | 5.7μA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~11V ±1V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Dual Supply Voltage | 5V |
| Current - Quiescent (Max) | 5.7μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 40mA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1441CS8#PBF Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a CMOS, TTL output is used here.This device is designed in Tube case.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.It's a typical General Purpose comparator.There are a total of 2 elements in it.There are 8 pins on this board.The type of mounting recommended is Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.You may wish to search LTC1441 for more solutions that address your specific needs.A quiescent current of 5.7μA is observed in this comparator.An excess of current supply over 5.7mA could result in malfunction of the comparator.Normal operation requires 9V operating supply voltage.
LTC1441CS8#PBF Features
CMOS, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 5.7μA
LTC1441CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1441CS8#PBF linear comparators applications.
- Power management
- Current and voltage sensing
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- Power Supervision
- Zero-Crossing Detectors
- Battery management and protection
- Portable Battery Monitoring
- Zero-Crossing Detectors
