banner_page

LTC1966MPMS8#TRPBF

RMS to DC Converters 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 0.65mm mm


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC1966MPMS8#TRPBF
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 959
  • Description: RMS to DC Converters 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 0.65mm mm (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Packaging Tape & Reel (TR)
Published 2007
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
HTS Code 8542.39.00.01
Subcategory Analog Special Function Converters
Technology CMOS
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number LTC1966
Pin Count 8
JESD-30 Code S-PDSO-G8
Qualification Status Not Qualified
Operating Temperature (Max) 125°C
Operating Temperature (Min) -55°C
Power Supplies 3/5/+-5V
Temperature Grade MILITARY
Current - Supply 155μA
Converter Type RMS TO DC CONVERTER
Linearity Error-Max (EL) 0.15%
Negative Supply Voltage-Nom -5V
Positive Input Voltage-Max 5.5V
Negative Input Voltage-Max -5.5V
Negative Supply Voltage-Max -5.5V
Height Seated (Max) 1.1mm
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant

LTC1966MPMS8#TRPBF Overview


Surface Mount is the mounting type of the device.A voltage supply of 2.7V~5.5V should be used to operate it.As for packaging, it is done in a Tape & Reel (TR) way.RMS to DC converter is used for packaging to use a unRMS to DC converter of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Device 8 has a total of 8 pins.RMS to DC converter is always powered by a 5V volt supply.RMS to DC converter is built wRMS to DC converterh terminations of 8.Best part of the device has a number LTC1966.The negative supply voltage is defined as -5V.In a way, it is a subclass of Analog Special Function Converters.This device has a supply of 3/5/+-5V.Currently, there is a supply of 155μA.Currently, 125°C is the maximum operational temperature.If it is to operate, it must be warmer than -55°C.

LTC1966MPMS8#TRPBF Features


Supply voltage of 2.7V~5.5V
8 pins
LTC1966 best part number

LTC1966MPMS8#TRPBF Applications


There are a lot of Linear Technology/Analog Devices LTC1966MPMS8#TRPBF applications of RMS to DC converters.

  • Battery-Powered Instruments
  • Process Control
  • True RMS Digital Multimeters and Panel Meters
  • Digital Multimeters
  • Panel Meters
  • True RMS AC + DC Measurements

Write a review

Note: HTML is not translated!
    Bad           Good