LTC1992-10CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 18.8kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1992 |
| Pin Count | 8 |
| Output Type | Differential, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 700μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 3.2MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.00025μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Nominal Gain Bandwidth Product | 4MHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1992-10CMS8#PBF Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. Differential-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 250μV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 700μA . It is recommended to keep the voltage gain at 80dB at all times. A benefit of this op amp ic is that it outputs Differential, Rail-to-Rail signals, which is one of the many advantages it has to offer. There is a rating of 1 for the operating supply voltage of the buffer op amp. It is recommended to keep the instrumentation amplifier resistance within the range of 18.8kOhm.
LTC1992-10CMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 18.8kOhm
LTC1992-10CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992-10CMS8#PBF Instrumentational OP Amps applications.
- Industrial applications including automation
- High input resistance broadband
- Radiation thermometry transducers
- Polarized electrodes
- Band-pass filter
- Image computer boards
- Vehicle electronics
- Differentiator circuits
- High speed sample
- Signal amplification
