LTC2050CS5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2050 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 800μA |
| Slew Rate | 2V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 75pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Input Offset Voltage (Vos) | 500nV |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Nominal Gain Bandwidth Product | 3MHz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2050CS5#TRPBF Overview
There is a SOT-23-5 Thin, TSOT-23-5 case package that contains the instrumentation amplifiers. An op amp ic of the Zero-Drift type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 5. A total of 5 pins are attached to buffer op amp. Please take in mind that op amp should be run at 3V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 5 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 500nV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. An 800μA volt supply current is needed for this linear amplifier to operate. In total, there are 1 circuits on this buffer amplifier. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier.
LTC2050CS5#TRPBF Features
5 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC2050CS5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2050CS5#TRPBF Instrumentational OP Amps applications.
- Proportional counter tubes
- Fast A/D and D/A converters
- Television
- Multimedia playback equipment
- Car stereo
- Division circuits
- Strain gauges
- Radar
- Inverse/same-phase proportional circuit
- Portable electronic products powered by batteries
