LTC3115MPFE-2#PBF
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3115 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 2.7V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.2V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 800mA 2A |
| Max Output Voltage | 40V |
| Topology | Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.7V |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
LTC3115MPFE-2#PBF Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 20 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. In order to save space, this voltage regulator is packaged in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. DC DC switching regulator is configured with 1 outputs. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. Operating at -55°C~150°C TJ is the recommended temperature for adjusting voltage regulator's operation. A DC-DC switching regulator of this type operates at a switching frequency of 100kHz~2MHz. A dc to dc voltage regulator's minimum input voltage of 2.2V is required for this voltage regulator to operate. DC DC switching regulator's maximum design flexibility comes from its output current of 800mA 2A. Its NOT SPECIFIED peak reflow temperature makes this regulator essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 24V. DC/DC regulators such as this one belong to the LTC3115 family of products. There is a possibility that DC DC switching regulator can give voltage at 2.7V volts. The switching regulator operation is carried out by 20 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 2.7V. With a maximum output voltage of 40V, DC DC switching regulator has a very high efficiency.
LTC3115MPFE-2#PBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
20 pins
LTC3115MPFE-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3115MPFE-2#PBF Voltage Regulators applications.
- Special machining machine tools
- Hydro power
- Production lines
- Cutting machine tools
- Handheld GPS
- Window air conditioners
- Various precision measuring detectors
- Photovoltaic power
- Energy management systems
- Solar power plants
